A flanged butterfly valve is usually cylindrical in shape, which is typically installed in a pipe system or as an inlet or outlet to some type of closed system.

Lug butterfly valves are throttling valves that turn in a quarter-turn rotary motion. Lug butterfly valves control the media flow in a system. The operators use these lug butterfly valves in different media and applications. When you operate a lug butterfly valve,

A lug butterfly valve is a kind of butterfly valve with a body that has “lugs” or hole protrusions around its circumference that provides passages for bolts.

The lug butterfly valve is connected between two pipe flanges with stud bolts. The structure of lug butterfly valve is simple, small in size and light in weight, which consists of only a few parts. Moreover, lug butterfly valve can be opened and closed quickly by rotating 90°.

The lug butterfly valve is somewhat similar to a 3-piece ball valve where one end of the wire can be removed without affecting the opposite side. Lug butterfly valve can be done by using threaded inserts, flanges and two sets of lugs that do not use nuts, as each flange has its own bolt. Lug butterfly valve is thus convenient to clean, inspect, repair or replace the lug butterfly valve because you do not need to shut down the entire system.

The lug-style butterfly valves, unlike the wafer-style, carry the weight of the piping through the valve body. Lug type butterfly valve allows dead-end service or removal of downstream piping.

The lug-style butterfly valves, unlike the wafer-style, carry the weight of the piping through the valve body. Lug type butterfly valve allows dead-end service or removal of downstream piping.

A lug butterfly valve is a type of quarter-turn valve that controls the flow of a product in a pipeline. From pharmaceuticals to manufacturing and food processing, the lug butterfly valve has a variety of applications and can be used to limit solid, liquid, or gas material flow.

The lug butterfly valve’s design is similar to a 3-piece ball valve in that one end of the line can be taken off without having an effect on the opposing side. Lug butterfly valve can be made by using threaded inserts, flanges, along with two sets of lugs that don’t utilize nuts since each flange features its own bolts.

UNIVERSAL WAFER TYPE BUTTERFLY VALVE,SOFT EXCHANGEABLE RUBBER SEAT,END STANDARD PN6,PN10,PN16,CLASS 150,TABLE D,TABLE E,JIS 10K